CNC Six-Sided Drilling / Drilling & Milling

MSK4-5

Name: MSK4-5 Double-Station Six-Sided CNC Drilling, Milling and Sawing Machine (Belt Feed)
Brand: JESH DRILL
SKU: MSK4-5

Double-Station Six-Sided CNC Drilling, Milling and Sawing Machine (Belt Feed)

working length 400–1500 mm, working width 60–150 mm, 28 spindles, total power 27.5 kW.

Get a Quote Technical consultation

MSK4-5 Double-Station Six-Sided CNC Drilling, Milling and Sawing Machine (Belt Feed)

400–1500 mm

Processing length

60–150 mm

Processing width

12–30 mm

Processing thickness

40 mm

Max. drilling depth

35 mm

Max. drilling diameter

28 pcs

Drilling spindles

Full specifications (25 items) ↓

Features

CNC Six-Sided Drilling / Drilling & Milling — structure and configuration

Six faces in one clamping

Upper and lower packs plus horizontal units finish all six faces without turning the panel.

Drilling and milling

Milling spindles allow grooving and shaping in the same set-up, cutting a second operation.

Line integration

Line or double-station configurations connect to infeed and outfeed as output grows.

Six faces, one clamping

Top and bottom faces plus all four sides, without turning the panel

Swipe sideways to see the full diagram

Top face

Vertical feed

Right side

Horizontal unit feed

Rear side

Horizontal feed

Left side

Horizontal unit · hidden by the panel

Front side

Horizontal feed · hidden by the panel

Bottom face

Feed from below

Conventional route

Several panel turnovers, re-clamping and re-datum each time, so errors stack up

→

MSK4-5

One clamping, 6 faces drilled in sequence from the same datum

The drawing is a generic isometric sketch of a panel, not to scale; arrows show the drilling direction. The actual drill-unit layout of this model is given in the specification table.

Machine photo

Product photo of this model

Note: the image is the product photo of this model and is for reference only; the delivered machine prevails.

Technical specifications

From this model's previous specification table (25 items)

Processing length	400–1500 mm
Processing width	60–150 mm
Processing thickness	12–30 mm
Max. drilling depth	40 mm
Max. drilling diameter	35 mm
Drilling spindles	28 pcs
Spindle speed	4800 rpm
Drill-motor power	2.2 kW × 6 = 13.2 kW
Voltage	380 V / 50 Hz
Total power	27.5 kW
Air pressure	0.6–0.8 MPa
CNC horizontal drill groups	2 groups (5×2 spindles)
CNC vertical top drill groups	2 groups (9×2 spindles) + horizontal drill groups 2×2
Feeding mode	belt
Dimensions	5000 × 3000 × 2200 mm
Machine weight	approx. 4000 kg
X-axis travel speed	90 m/min
X-axis top-drill travel servo	0.75 kW × 2
X-axis level-drill travel servo	0.75 kW × 2
Y-axis moving speed	90 m/min
Y-axis top-drill travel servo	0.75 kW × 2
Y-axis level-drill travel servo	0.75 kW × 2
Z-axis travel speed	36 m/min
Z-axis top-drill advance servo	1.3 kW × 2
Z-axis level-drill advance servo	0.75 kW × 2

Note: the figures above come from this model's specification sheet; the machine manual or the configuration sheet confirmed by our sales engineer prevails.