MSK13AL
300–2440 mm processing length, 80–800 mm processing width, 286 spindles (4 top, 7 bottom, 2 horizontal rows), 45 kW total power.
Features
CNC Multi-Spindle Drilling Machine — structure and configuration
Five faces in one clamping
The top face plus the front, rear and both side faces are drilled in one clamping — no panel turnover and no second set-up.
Double-station feed
Belt or chain feeding runs through stations P1 and P2, so one side drills while the other is loaded.
Scan to run
QR / barcode scanning turns MPR and DXF drawings into machining programs, so changeover needs no manual programming.
Five faces, one clamping
Top face plus four sides in one set-up; the bottom face is not drilled
Swipe sideways to see the full diagram
Top face
Vertical feed; face holes in one pass
Right side
Horizontal feed
Rear side
Horizontal feed
Left side
Horizontal feed · hidden by the panel in the drawing
Front side
Horizontal feed · hidden by the panel in the drawing
Conventional route
Several panel turnovers, re-clamping and re-datum each time, so errors stack up
MSK13AL
One clamping, 5 faces drilled in sequence from the same datum
The drawing is a generic isometric sketch of a panel, not to scale; arrows show the drilling direction. The actual drill-unit layout of this model is given in the specification table.
Machine photo
Product photo of this model
Note: the image is the product photo of this model and is for reference only; the delivered machine prevails.
Technical specifications
From this model's product document (17 items)
| Processing length | 300–2440 mm |
|---|---|
| Processing width | 80–800 mm |
| Processing thickness | 12–50 mm |
| Max. drilling depth | 40 mm |
| Max. drilling diameter | 35 mm |
| Drilling spindles | 286 pcs |
| Vertical top drill rows | 4 rows |
| Vertical bottom drill rows | 7 rows |
| Horizontal drill rows (left & right) | 2 rows |
| Spindle speed | 2840 rpm |
| Processing speed | 13–16 pcs/min |
| Air pressure | 0.6–0.8 MPa |
| Voltage | 380 V / 50 Hz |
| Total power | 45 kW |
| Feeding mode | belt |
| Dimensions | 5000 × 2550 × 2200 mm |
| Machine weight | approx. 6000 kg |
Note: the figures above come from this model's specification sheet; the machine manual or the configuration sheet confirmed by our sales engineer prevails.
Working sequence
Scan a label or call up the program — four steps per batch
Note: the sequence follows the usual order on CNC models; the machine manual prevails.
Applications
Typical work for this machine type
Panel furniture lines
Five-face holes and side bores in cabinet panels
Custom home furnishing
Scan-to-run flexible processing of one-off panels
Cabinets and wardrobes
Multi-face holes in sides, shelves and doors
Technical documents
Manuals and datasheets are available from our sales team with your enquiry
Specification sheet
Detailed figures, installation dimensions and power requirements
Request documentsOperation and maintenance guide
Daily operation routine and routine maintenance notes
Request documentsInspection and warranty
Inspection routine, warranty scope and after-sales support
Request documentsRelated products
Same range and comparable models
New arrivals
The latest machines added to the range
