MSK-612S
working length 200–2500 mm, working width 50–1200 mm, total power 24.8 kW.
Features
CNC Six-Sided Drilling / Drilling & Milling — structure and configuration
Six faces in one clamping
Upper and lower packs plus horizontal units finish all six faces without turning the panel.
Drilling and milling
Milling spindles allow grooving and shaping in the same set-up, cutting a second operation.
Line integration
Line or double-station configurations connect to infeed and outfeed as output grows.
Six faces, one clamping
Top and bottom faces plus all four sides, without turning the panel
Swipe sideways to see the full diagram
Top face
Vertical feed
Right side
Horizontal unit feed
Rear side
Horizontal feed
Left side
Horizontal unit · hidden by the panel
Front side
Horizontal feed · hidden by the panel
Bottom face
Feed from below
Conventional route
Several panel turnovers, re-clamping and re-datum each time, so errors stack up
MSK-612S
One clamping, 6 faces drilled in sequence from the same datum
The drawing is a generic isometric sketch of a panel, not to scale; arrows show the drilling direction. The actual drill-unit layout of this model is given in the specification table.
Machine photo
Product photo of this model
Note: the image is the product photo of this model and is for reference only; the delivered machine prevails.
Technical specifications
From this model's previous specification table (8 items)
| Max clamp speed | 130 m/min |
|---|---|
| Y/Z-axis max speed | 75 / 30 m/min |
| Spindle power | 3.5 kW × 2 |
| Workpiece thickness | 10–50 mm |
| Workpiece length | 200–2500 mm |
| Workpiece width | 50–1200 mm |
| Total power | 24.8 kW |
| Dimensions | 5200L × 2820W × 2080H |
Note: the figures above come from this model's specification sheet; the machine manual or the configuration sheet confirmed by our sales engineer prevails.
Working sequence
Load, position, drill, unload — the cycle depends on the feeding method
Note: the sequence follows the usual order on mechanical multi-spindle drills; the machine manual prevails.
Applications
Typical work for this machine type
Panel furniture lines
Six-face drilling and grooving of cabinet panels
Custom home furnishing
Flexible one-piece flow with quick changeover
Doors and side panels
Holes on both faces plus side grooves
Technical documents
Manuals and datasheets are available from our sales team with your enquiry
Specification sheet
Detailed figures, installation dimensions and power requirements
Request documentsOperation and maintenance guide
Daily operation routine and routine maintenance notes
Request documentsInspection and warranty
Inspection routine, warranty scope and after-sales support
Request documentsRelated products
Same range and comparable models
New arrivals
The latest machines added to the range
