CNC Six-Sided Drilling / Drilling & Milling

MSK6-3XL

Name: MSK6-3XL Six-Sided Drilling & Milling Center (Auto-Rotary Series)
Brand: JESH DRILL
SKU: MSK6-3XL

Six-Sided Drilling & Milling Center (Auto-Rotary Series)

Processing length 180–3000 mm, Board thickness 9–50 mm, Total power 2.2 × 3 = 6.6 kW, Machine weight approx. 3600 kg.

Get a Quote Technical consultation

MSK6-3XL Six-Sided Drilling & Milling Center (Auto-Rotary Series)

180–3000 mm

Processing length

35–1250 mm

Working width (single station)

9–50 mm

Board thickness

4500 rpm

Spindle speed

200 mm*2

Dust port diameter

35 mm

Max hole diameter

Full specifications (23 items) ↓

Features

CNC Six-Sided Drilling / Drilling & Milling — structure and configuration

🧊

Six faces in one clamping

Upper and lower packs plus horizontal units finish all six faces without turning the panel.

🔧

Drilling and milling

Milling spindles allow grooving and shaping in the same set-up, cutting a second operation.

🔗

Line integration

Line or double-station configurations connect to infeed and outfeed as output grows.

Six faces, one clamping

Top and bottom faces plus all four sides, without turning the panel

Swipe sideways to see the full diagram

Top face

Vertical feed

Right side

Horizontal unit feed

Rear side

Horizontal feed

Left side

Horizontal unit · hidden by the panel

Front side

Horizontal feed · hidden by the panel

Bottom face

Feed from below

Conventional route

Several panel turnovers, re-clamping and re-datum each time, so errors stack up

→

MSK6-3XL

One clamping, 6 faces drilled in sequence from the same datum

The drawing is a generic isometric sketch of a panel, not to scale; arrows show the drilling direction. The actual drill-unit layout of this model is given in the specification table.

Machine photo

Image from this model's product document for reference only; the delivered machine prevails.

Note: the image comes from this model page of the catalogue and is for reference only; the delivered machine prevails.

Technical specifications

From this model's product document (23 items)

Processing length	180–3000 mm
Working width (single station)	35–1250 mm
Board thickness	9–50 mm
Spindle speed	4500 rpm
Dust port diameter	200 mm*2
Max hole diameter	35 mm
Tool diameter	6–10 mm
Max drilling depth	50 mm
Tool shank diameter	1/2
Air pressure	0.5–0.6 mpa
Table height	950 mm
Total drilling motor power	2.2*3=6.6 Kw
Machine weight	approx. 3600 kg
Servo motor power	10 Kw
Dimensions	580031002500 mm(with outriggers extended)
Fan motor power	1 Kw
Lower head spindles	9 spindles(high-speed spindles2 groups)
Y-axis speed	90 m/min
Upper head servo power	1.5 Kw
Lower head servo power	1 Kw
Z-axis speed	36 m/min
Servo power	0.75 kW
Total power	2.2 × 3 = 6.6 kW

Note: the figures above come from this model's specification sheet; the machine manual or the configuration sheet confirmed by our sales engineer prevails.