MSK6-2XL
Processing length 200–3000 mm, Board thickness 9–50 mm, Total power 2.2 × 2 = 4.4 kW, Machine weight approx. 3600 kg.
Features
CNC Six-Sided Drilling / Drilling & Milling — structure and configuration
Six faces in one clamping
Upper and lower packs plus horizontal units finish all six faces without turning the panel.
Drilling and milling
Milling spindles allow grooving and shaping in the same set-up, cutting a second operation.
Line integration
Line or double-station configurations connect to infeed and outfeed as output grows.
Six faces, one clamping
Top and bottom faces plus all four sides, without turning the panel
Swipe sideways to see the full diagram
Top face
Vertical feed
Right side
Horizontal unit feed
Rear side
Horizontal feed
Left side
Horizontal unit · hidden by the panel
Front side
Horizontal feed · hidden by the panel
Bottom face
Feed from below
Conventional route
Several panel turnovers, re-clamping and re-datum each time, so errors stack up
MSK6-2XL
One clamping, 6 faces drilled in sequence from the same datum
The drawing is a generic isometric sketch of a panel, not to scale; arrows show the drilling direction. The actual drill-unit layout of this model is given in the specification table.
Machine photo
Image from this model's product document for reference only; the delivered machine prevails.
Note: the image comes from this model page of the catalogue and is for reference only; the delivered machine prevails.
配置明细
图上配文字取自本机型product说明资料
Control system:台湾新代,伺服电机:台湾新代,CAM 软件
CNC 控制application软件
scan
systemsupport二维/条形码scan,并即刻generate the machining program.
仿真演示
订单导入
3D画图功能
Production记录查看
功 能
上表面垂直drilling
独立钻轴
下表面垂直drilling
侧面drilling
独立钻轴:2个
前侧面水平drilling
独立钻轴:1个
后侧面水平drilling
独立钻轴:1个
双板drilling
可以同时加工2块板
可对称加工2板
铣槽和开料功能
可实现不规则图形开槽和开料加工
曲线切割
可实现不规则图形加工
配置 and 品牌
集成自主R&DCAD/CAM 软件
可对加工板材进行图形编辑,直接ProductionNC 程序进行加工;
上加工组
本机设置1个上加工组
下加工组
本机设置1个下加工组
气浮式整板台面
减小磨擦,防止刮花板面.
夹手
高速电机
CC 长川
高精密行星减速机
中国上市company:中大
齿轮齿条
上加工组开槽锯可选配 (默认不包含此配置)
X 方向开槽锯片
Y方向开槽锯片
automatic换刀可选配 (默认不包含此配置)
细节图示
文档中未配说明文字图
注:以上文字 and 图片取自本机型product说明资料,图中标注沿用原资料;示意图非按比例,不代表现场实拍.
Technical specifications
From this model's product document (24 items)
| Processing length | 200–3000 mm |
|---|---|
| Working width (single station) | 40–1250 mm |
| Board thickness | 9–50 mm |
| Spindle speed | 4500 rpm |
| Dust port diameter | 200 mm |
| Max hole diameter | 35 mm |
| Tool diameter | 6–10 mm |
| Max drilling depth | 50 mm |
| Tool shank diameter | 1/2 |
| Air pressure | 0.5–0.6 mpa |
| Table height | 950 mm |
| Total drilling motor power | 2.2*2=4.4 Kw |
| Machine weight | approx. 3600 kg |
| Servo motor power | 7 Kw |
| Dimensions | 5800*3100*2500 mm(with outriggers extended) |
| Fan motor power | 1 Kw |
| Stations | 1 pcs (left station) |
| Lower head spindles | 9 spindles(high-speed spindles1 groups) |
| Y-axis speed | 90 m/min |
| Upper head servo power | 1.5 Kw |
| Lower head servo power | 1 Kw |
| Z-axis speed | 36 m/min |
| Servo power | 0.75 kW |
| Total power | 2.2 × 2 = 4.4 kW |
Note: the figures above come from this model's specification sheet; the machine manual or the configuration sheet confirmed by our sales engineer prevails.
Working sequence
Load, position, drill, unload — the cycle depends on the feeding method
Note: the sequence follows the usual order on mechanical multi-spindle drills; the machine manual prevails.
Applications
Typical work for this machine type
Panel furniture lines
Six-face drilling and grooving of cabinet panels
Custom home furnishing
Flexible one-piece flow with quick changeover
Doors and side panels
Holes on both faces plus side grooves
Technical documents
Manuals and datasheets are available from our sales team with your enquiry
Specification sheet
Detailed figures, installation dimensions and power requirements
Request documentsOperation and maintenance guide
Daily operation routine and routine maintenance notes
Request documentsInspection and warranty
Inspection routine, warranty scope and after-sales support
Request documentsMore in this range
CNC Six-Sided Drilling / Drilling & Milling
New arrivals
The latest machines added to the range
