MSK5XL-HD-212
Processing length 210–1500 mm, Working width 50–250 mm, Board thickness 12–30 mm, Total power 13 kW.
Features
CNC Multi-spindle Drilling Machine — structure and configuration
Five faces in one clamping
The top face plus the front, rear and both side faces are drilled in one clamping — no panel turnover and no second set-up.
Double-station feed
Belt or chain feeding runs through stations P1 and P2, so one side drills while the other is loaded.
Scan to run
QR / barcode scanning turns MPR and DXF drawings into machining programs, so changeover needs no manual programming.
Five faces, one clamping
Top face plus four sides in one set-up; the bottom face is not drilled
Swipe sideways to see the full diagram
Top face
Vertical feed; face holes in one pass
Right side
Horizontal feed
Rear side
Horizontal feed
Left side
Horizontal feed · hidden by the panel in the drawing
Front side
Horizontal feed · hidden by the panel in the drawing
Conventional route
Several panel turnovers, re-clamping and re-datum each time, so errors stack up
MSK5XL-HD-212
One clamping, 5 faces drilled in sequence from the same datum
The drawing is a generic isometric sketch of a panel, not to scale; arrows show the drilling direction. The actual drill-unit layout of this model is given in the specification table.
Machine photo
Product photo of this model
Note: the image is the product photo of this model and is for reference only; the delivered machine prevails.
Configuration details
Captions in the images are taken from this model product manual
JESHDRILL MSK5XL-HD-212 notes
Main features
Speed
The top drill row uses 2 heads, each built from 9 independently working spindles. The program assigns drilling tasks according to hole positions, giving high speed for batch drilling.
Flexibility
Independently working spindles in the top row meet the flexibility needed for special drilling, batch production and custom work.
Control system
Captions in the images are taken from this model product manual
Operating system
Lubuntu operating system
A lightweight, fast Linux system with the LXDE/LXQT desktop and lightweight applications, well suited as a CNC control system,
with these advantages:
Lightweight: low CPU load, better still with ample memory;
Hardware
Captions in the images are taken from this model product manual
Industrial PC control
Top drill block
Taiwan-imported drill blocks; 4 columns of twin drill units on top, 8 units in total.
Top drill block spindles
Taiwan-imported drill units; every spindle works independently.
Front magazine
Horizontal drill block
Taiwan-imported drill units; every spindle works independently.
Rear horizontal drill spindles
Horizontal drilling on the rear side of the panel.
Feeding device
Chain feeding device.
Automatic lubrication system
The lubrication system oils automatically; only the reservoir needs periodic refilling.
Advantages of the Inovance EtherCAT servo system:
Efficient control: EtherCAT bus communication for fast response and stable running;
High accuracy: closed loops for position, speed and torque, with no stepper-motor step loss;
High speed: rated 2000-3000 rpm for strong high-speed performance;
The lower drill row shows spindle position on a digital display
Lift-and-lower unloading
Return belt
Front stacking
Top drill heads CNC-controlled
Vertical drill row: 1 group
Detail views
Images without captions in the document
Note: the text and images above come from this model product manual and the callouts follow the original document; the diagrams are not to scale and are not site photographs.
Technical specifications
From this model's product document (17 items)
| Processing length | 220–1500 mm |
|---|---|
| Processing width | 50–250 mm |
| Processing thickness | 12–30 mm |
| Max. drilling depth | 40 mm |
| Max. drilling diameter | 35 mm |
| Drilling spindles | 37 pcs |
| Spindle speed | 2840 rpm |
| Drill-motor power | 2.2 kW × 2 + 1.5 kW × 3 = 8.9 kW |
| Voltage | 380 V / 50 Hz |
| Total power | 13 kW |
| Air pressure | 0.6–0.8 MPa |
| Horizontal drill rows (left & right) | 2 rows |
| CNC top drill groups | 2 groups |
| Vertical bottom drill rows | 1 row |
| Feeding mode | chain |
| Dimensions | 3400 × 2500 × 1700 mm |
| Machine weight | approx. 2200 kg |
Note: the figures above come from this model's specification sheet; the machine manual or the configuration sheet confirmed by our sales engineer prevails.
Working sequence
Scan a label or call up the program — four steps per batch
Note: the sequence follows the usual order on CNC models; the machine manual prevails.
Applications
Typical work for this machine type
Panel furniture lines
Five-face holes and side bores in cabinet panels
Custom home furnishing
Scan-to-run flexible processing of one-off panels
Cabinets and wardrobes
Multi-face holes in sides, shelves and doors
Technical documents
Manuals and datasheets are available from our sales team with your enquiry
Specification sheet
Detailed figures, installation dimensions and power requirements
Request documentsOperation and maintenance guide
Daily operation routine and routine maintenance notes
Request documentsInspection and warranty
Inspection routine, warranty scope and after-sales support
Request documentsRelated products
Same range and comparable models
New arrivals
The latest machines added to the range
