MSK5-S
Single-unit five-sided centre finishing the top face and four sides in one pass, for 100–3000 × 50–800 mm panels with 22 spindles at 2.2 kW.
Features
CNC Six-Sided Drilling / Drilling & Milling — structure and configuration
Six faces in one clamping
Upper and lower packs plus horizontal units finish all six faces without turning the panel.
Drilling and milling
Milling spindles allow grooving and shaping in the same set-up, cutting a second operation.
Line integration
Line or double-station configurations connect to infeed and outfeed as output grows.
Six faces, one clamping
Top and bottom faces plus all four sides, without turning the panel
Swipe sideways to see the full diagram
Top face
Vertical feed
Right side
Horizontal unit feed
Rear side
Horizontal feed
Left side
Horizontal unit · hidden by the panel
Front side
Horizontal feed · hidden by the panel
Bottom face
Feed from below
Conventional route
Several panel turnovers, re-clamping and re-datum each time, so errors stack up
MSK5-S
One clamping, 6 faces drilled in sequence from the same datum
The drawing is a generic isometric sketch of a panel, not to scale; arrows show the drilling direction. The actual drill-unit layout of this model is given in the specification table.
Machine photo
Image from this model's product document for reference only; the delivered machine prevails.
Note: the image comes from this model page of the catalogue and is for reference only; the delivered machine prevails.
Technical specifications
From this model's product document (6 items)
| Processing length | 100–3000 mm |
|---|---|
| Processing width | 50–800 mm |
| Upper vertical rows | 22 × 1 = 22 |
| Drilling motor | 2.2 kW |
| Machine weight | approx. 1200 kg |
| Dimensions | 3700×2000×2500 mm |
Note: the figures above come from this model's specification sheet; the machine manual or the configuration sheet confirmed by our sales engineer prevails.
Working sequence
Scan a label or call up the program — four steps per batch
Note: the sequence follows the usual order on CNC models; the machine manual prevails.
Applications
Typical work for this machine type
Panel furniture lines
Six-face drilling and grooving of cabinet panels
Custom home furnishing
Flexible one-piece flow with quick changeover
Doors and side panels
Holes on both faces plus side grooves
Technical documents
Manuals and datasheets are available from our sales team with your enquiry
Specification sheet
Detailed figures, installation dimensions and power requirements
Request documentsOperation and maintenance guide
Daily operation routine and routine maintenance notes
Request documentsInspection and warranty
Inspection routine, warranty scope and after-sales support
Request documentsMore in this range
CNC Six-Sided Drilling / Drilling & Milling
New arrivals
The latest machines added to the range
