MSK100-7A
180 independently driven spindles — 3 upper-vertical groups, 2 lower-vertical groups and 2 horizontal groups — complete six-sided drilling in a single clamping. Barcode scanning plus MPR and DXF import generate the machining program automatically, covering batch production and custom whole-house panels.
Six faces, bottom included
Upper-vertical, lower-vertical and horizontal groups each cover their own faces at one station
Swipe sideways to see the full diagram
Top face
Upper-vertical ×3, vertical plunge
Right side
Horizontal plunge
Back side
Horizontal plunge
Left side
Horizontal plunge · hidden behind the panel
Front side
Horizontal plunge · hidden behind the panel
Bottom face
Lower-vertical ×2, upward plunge · shown from below the panel
Group and spindle counts come from this model’s specification sheet; the confirmed configuration sheet prevails.
Video
See the machining process in action
What the six faces are drilled with
Four key parts that show how the machine works
The numbers on the machine match the four close-ups below.
The operating interface of the CNC system — programs are edited, checked and launched here.
Three groups arranged side by side; the spindles plunge downward to drill the top face.
The panel passes along the table while the hold-down beams keep it steady, limiting movement during drilling.
Units V1–V6 clamp the panel in sections along its length, holding it in the machining position.
Technical specifications
Main specifications of the MSK100-7A
| Processing length | 400–2440 mm |
|---|---|
| Processing width | 120–800 mm |
| Processing thickness | 12–50 mm |
| Max. drilling depth | 40 mm |
| Max. drilling diameter | 35 mm |
| Qty. of spindles | 180 pcs |
| Spindle speed | 4800 rpm |
| Drill motor power | 2.2 kW × 10 = 22 kW |
| Total power | 46 kW |
| Voltage | 380V / 50Hz |
| Air pressure | 0.6–0.8 MPa |
| Feeding mode | Belt feeding |
| Upper-vertical drill groups | 3 groups |
| Lower-vertical drill groups | 2 groups |
| Horizontal drill groups | 2 groups |
| X / Y axis speed | 90 m/min |
| Z axis speed | 36 m/min |
| Dimensions | 6000 × 3530 × 2500 mm |
| Weight | About 8500 kg |
Note: the figures above come from this model’s specification sheet; the machine manual or the configuration sheet confirmed by our sales engineer prevails.
Patent application numbers
Features
From scanning to output, the program builds itself
Scan to generate the program
The system reads QR / barcode labels, analyses the input drawing and generates the machining program without manual parameter editing.
MPR / DXF / MPR-3D
Reads 3D drawings from Yuanfang software (MPR), Homag 3D files and AutoCAD 2D drawings (DXF), removing manual programming.
In-house CNC system
A self-developed multi-axis CNC system with 3D graphics, so the hole layout on a panel can be reviewed on the control itself.
180 independent spindles
Each spindle moves independently, so special hole patterns, repetitive batch holes and custom panels all run on one machine.
Three drill groups cover six faces
3 upper-vertical, 2 lower-vertical and 2 horizontal groups finish top, bottom and the four side faces at one station — no flipping or re-clamping.
Servo-driven travel
Top and horizontal drill groups are servo-driven for travel and feed, at 90 m/min on X and Y and 36 m/min on Z, with 46 kW total power.
Machining sequence
One system, from drawing to hole position
Operation and software
Scan, read the drawing, generate the program - all on the control
Code scanning
Supports QR / barcode scanning, auto-analyses the input drawing and generates the machining program with no manual adjustment.
Program generation
MPR: 3D drawing exported by Yuanfang software; DXF: AutoCAD 2D drawing; MPR-3D: Homag 3D drawing file.
Self-developed CNC system
Self-developed system with high machining accuracy and full 3D graphics, so hole layouts can be reviewed inside the control.
Note: the images show the same operation and software interface used across this series.
Applications
Panel machining that needs six-sided drilling
Batch panel furniture
High-repeat hole drilling for wardrobes, cabinets and TV units
Custom whole-house panels
One drawing per batch, scanned and run directly to cut changeover waits
Panels that need bottom-side holes
When both top and bottom need holes, no flipping is needed — the lower-vertical group drills from below
Technical documents
Manuals and data sheets are available from our sales team with your inquiry
Technical data sheet
Detailed parameters, installation dimensions and electrical requirements
Request documentsPre-delivery inspection and warranty
Inspection process, warranty scope and after-sales support
Request documents