MSK100-6
Processing length 400–2440 mm, Working width 150–730 mm, Board thickness 8–50 mm, Spindles 144.
Features
CNC Multi-Spindle Drilling Machine — structure and configuration
Five faces in one clamping
The top face plus the front, rear and both side faces are drilled in one clamping — no panel turnover and no second set-up.
Double-station feed
Belt or chain feeding runs through stations P1 and P2, so one side drills while the other is loaded.
Scan to run
QR / barcode scanning turns MPR and DXF drawings into machining programs, so changeover needs no manual programming.
Five faces, one clamping
Top face plus four sides in one set-up; the bottom face is not drilled
Swipe sideways to see the full diagram
Top face
Vertical feed; face holes in one pass
Right side
Horizontal feed
Rear side
Horizontal feed
Left side
Horizontal feed · hidden by the panel in the drawing
Front side
Horizontal feed · hidden by the panel in the drawing
Conventional route
Several panel turnovers, re-clamping and re-datum each time, so errors stack up
MSK100-6
One clamping, 5 faces drilled in sequence from the same datum
The drawing is a generic isometric sketch of a panel, not to scale; arrows show the drilling direction. The actual drill-unit layout of this model is given in the specification table.
Machine photo
Image from this model's product document for reference only; the delivered machine prevails.
Note: the image comes from this model page of the catalogue and is for reference only; the delivered machine prevails.
配置明细
图上配文字取自本机型product说明资料
JESHMSK100-6说明
主要特
速 度
此drillingsystem由144个可独立工作钻轴组成.由程序根据孔位automatic给每个钻轴分配drilling任务,速度快,suitable for batchdrilling任务.
灵 活
可独立工作钻轴,确保满足特殊drilling,batchProduction,以及customProduction柔性drilling要求.
Control system
图上配文字取自本机型product说明资料
操 作 系 统
Lubuntu 是一个快速/轻量级操作system,具有干净/易使用用户界面.它是一个Linuxsystem,使用最小桌面LXDE/LXQT和一系列轻量application程序.作为一个CNC system使用,其has以下优:
轻巧 －只需要很少CPU资源即可执行顺畅,而且当记忆体容量充足时表现特别出色.
快速 －它甚至可以运行1999 yrs老旧电脑上.
优良稳定性和安全性－ Linux开放源代码,将所有代码放网上,worldwide程序员都看得到,有什么缺陷和漏洞,很快就会被发现,从而成就了它稳定性和安全注.
内置3D画图功能
完善3D 图形画图功能.
程序生成
automatic分析输入图纸并automaticgenerate the machining program,无需人手干预.
scan
systemsupport二维/条形码scan,并即刻generate the machining program.
双板加工
可设置双板加工模式,一次完成2块板加工,双倍速度,双倍产能.
刀库自设
system提供刀库自设功能,用户可自行更改钻刀排列,方便自行优化drilling方案.
双板镜面打孔
某些家具中,如柜子,会有左右或上下镜面对称木板drilling要求,过去Production中,需要分开两个Production程序,繁琐并不便计数.本system能实现一次完成双板镜面打孔,程序automatic生成,极大简化了Production过程.
硬件
图上配文字取自本机型product说明资料
上置钻包
使用台湾进口钻包,上置4列双钻组,共8个钻组.
上置钻包钻轴
使用台湾进口钻组,每个轴都能独立工作.
CNC台面
CNCautomatic避让
水平钻包
台湾进口钻组,每个钻轴都能独立工作.
前/后侧水平钻轴
实现板前和后侧水平drilling.
送料装置
本machine使用皮带送料装置,并能一次加工2块板.
吸尘口
高效吸尘道,极大减少木屑混入空气,减小木尘对人体伤害,并大大提高Production防火安全.
钻组移动使用进口直线导轨
进口直线导轨和滚珠丝杆,高精度,耐用,大大提交加工精度.耐用,低损坏率,节约维修和时间.
分布式独立automatic润滑system
采用分布式独立润滑system,避免因油路过长,一些部位出现渗油,一些部位润滑油却到达不了问题,同时也减少没路堵塞机率.本润滑systemautomatic上油,只需定时补充油罐储油即可.
伺服控制
本machine使用汇川伺服驱动器,伺服电机,其控制通过高效响应协议Ethercat,快速稳定.
高精度:实现了位置,速度和力矩闭环控制;克服了步进电机失步问题.
高转速:高速性能好,一般额定转速能达到2000～3000转.
高适应性:抗过载能力强,能承受三倍额定转矩负载,对有瞬间负载波动和要求快速起动场合特别适用.
细节图示
文档中未配说明文字图
注:以上文字 and 图片取自本机型product说明资料,图中标注沿用原资料;示意图非按比例,不代表现场实拍.
Technical specifications
From this model's product document (26 items)
| Processing length | 380–2440 mm |
|---|---|
| Processing width (single board) | 120–800 mm |
| Processing width (double board) | 120–450 mm |
| Processing thickness | 12–50 mm |
| Max. drilling depth | 40 mm |
| Max. drilling diameter | 35 mm |
| Drilling spindles | 144 个 |
| Spindle speed | 4800 rpm |
| Drill-motor power | 2.2 kW × 10 = 22 kW |
| Voltage | 380 V / 50 Hz |
| Total power | 49.5 kW |
| Air pressure | 0.6–0.8 MPa |
| CNC horizontal drill groups | 2 组 (8×2 轴) |
| CNC vertical top drill groups | 4 组 (16×8 轴) |
| Feeding mode | 皮带 |
| Dimensions | 6000 × 3530 × 2500 mm |
| Machine weight | 约 7500 kg |
| X-axis travel speed | 90 m/min |
| X-axis top-drill travel servo | 1.0 kW × 8 |
| X-axis level-drill travel servo | 1.0 kW × 2 |
| Y-axis moving speed | 90 m/min |
| Y-axis top-drill travel servo | 1.0 kW × 8 |
| Y-axis level-drill travel servo | 1.0 kW × 2 |
| Z-axis travel speed | 36 m/min |
| Z-axis top-drill advance servo | 1.5 kW × 4 |
| Z-axis level-drill advance servo | 0.75 kW × 2 |
Note: the figures above come from this model's specification sheet; the machine manual or the configuration sheet confirmed by our sales engineer prevails.
Working sequence
Scan a label or call up the program — four steps per batch
Note: the sequence follows the usual order on CNC models; the machine manual prevails.
Applications
Typical work for this machine type
Panel furniture lines
Five-face holes and side bores in cabinet panels
Custom home furnishing
Scan-to-run flexible processing of one-off panels
Cabinets and wardrobes
Multi-face holes in sides, shelves and doors
Technical documents
Manuals and datasheets are available from our sales team with your enquiry
Specification sheet
Detailed figures, installation dimensions and power requirements
Request documentsOperation and maintenance guide
Daily operation routine and routine maintenance notes
Request documentsInspection and warranty
Inspection routine, warranty scope and after-sales support
Request documentsMore in this range
CNC Multi-Spindle Drilling Machine
New arrivals
The latest machines added to the range
Popular models
Ranked by views
