MSK100-4L
80 independently driven spindles with dual-station chain feeding complete five-sided drilling in a single clamping. Barcode scanning plus MPR and DXF drawing import generate the machining program automatically, covering both batch production and custom panel batches.
Five faces, one setup
Top face plus four side faces, finished at one station — the bottom face is not drilled
Swipe sideways to see the full diagram
Top face
Vertical plunge; face holes formed in one pass
Right side
Horizontal plunge
Back side
Horizontal plunge
Left side
Horizontal plunge · hidden behind the panel
Front side
Horizontal plunge · hidden behind the panel
Conventional
Repeated re-clamping, with error accumulating at every flip
MSK100-4L
One setup, five faces drilled in sequence, all holes on the same datum
Diagram is illustrative, not to scale; arrows show tool entry direction.
Inside the machine
Overview shows where; close-ups show what; the numbers tie them together
The side-drilling heads sit behind the frame from this angle — see the diagram above. The four parts marked here are the ones clearly visible from the front.
QR code, MPR or DXF goes straight in and becomes the machining program — no manual programming
All 80 spindles sit on this bank and fire individually as programmed, not as one block
Chain feeding, P1 and P2 alternating — one is being drilled while the other is loaded
Four locating units pin the panel to one datum — the reason a single setup actually holds
Close-ups are real detail shots; numbers match the notes below.
Technical specifications
Main specifications of the MSK100-4L
| Processing length | 300–1500 mm |
|---|---|
| Processing width (single board) | 50–800 mm |
| Processing width (double board) | 50–450 mm |
| Processing thickness | 12–50 mm |
| Max. drilling depth | 40 mm |
| Max. drilling diameter | 35 mm |
| Drilling spindles | 80 pcs |
| Spindle speed | 4800 rpm |
| Drill-motor power | 2.2 kW × 6 = 13.2 kW |
| Voltage | 380 V / 50 Hz |
| Total power | 29.7 kW |
| Air pressure | 0.6–0.8 MPa |
| CNC horizontal drill groups | 2 groups (5×8 spindles) |
| CNC vertical top drill groups | 2 groups (16×4 spindles) |
| Feeding mode | chain |
| Dimensions | 5000 × 3150 × 2500 mm |
| Machine weight | approx. 4500 kg |
| X-axis travel speed | 90 m/min |
| X-axis top-drill travel servo | 1.0 kW × 6 |
| X-axis level-drill travel servo | 1.0 kW × 2 |
| Y-axis moving speed | 90 m/min |
| Y-axis top-drill travel servo | 1.0 kW × 6 |
| Y-axis level-drill travel servo | 1.0 kW × 2 |
| Z-axis travel speed | 36 m/min |
| Z-axis top-drill advance servo | 1.5 kW × 2 |
| Z-axis level-drill advance servo | 0.75 kW × 2 |
Note: the figures above come from this model’s specification sheet; the machine manual or the configuration sheet confirmed by our sales engineer prevails.
Patent application numbers
Features
From scanning to output, the program builds itself
Scan to generate the program
The system reads QR / barcode labels, analyses the input drawing and generates the machining program without manual parameter editing.
MPR / DXF / MPR-3D
Reads 3D drawings from Homag / Yuanfang software (MPR), Homag 3D files and AutoCAD 2D drawings (DXF), removing manual programming.
In-house CNC system
A self-developed multi-axis CNC system with 3D graphics, so the hole layout on a panel can be reviewed on the control itself.
80 independent spindles
Each spindle moves independently, so special hole patterns, repetitive batch holes and custom panels all run on one machine.
Dual-station chain feeding
Chain feeding runs through two stations, so one side loads while the other machines, cutting panel waiting time.
Servo-driven positioning
Top and horizontal drill groups are servo-driven for travel and feed, at 90 m/min on X and Y and 36 m/min on Z.
Machining sequence
One system, from drawing to hole position
Operation and software
Scan, read the drawing, generate the program - all on the control
Code scanning
Supports QR / barcode scanning, auto-analyses the input drawing and generates the machining program with no manual adjustment.
Program generation
MPR: 3D drawing exported by Homag / Yuanfang software; DXF: AutoCAD 2D drawing; MPR-3D: Homag 3D drawing file.
Self-developed CNC system
Self-developed system with high machining accuracy and full 3D graphics, so hole layouts can be reviewed inside the control.
Note: the images above are from this model’s product catalogue.
Applications
Panel machining that needs five-sided drilling
Batch panel furniture
High-repeat hole drilling for wardrobes, cabinets and TV units
Custom whole-house panels
One drawing per batch, scanned and run directly to cut changeover waits
Cabinet and office furniture lines
Alternating dual-station loading for continuous flow between processes
Technical documents
Manuals and data sheets are available from our sales team with your inquiry
Technical data sheet
Detailed parameters, installation dimensions and electrical requirements
Request documentsPre-delivery inspection and warranty
Inspection process, warranty scope and after-sales support
Request documentsRelated products
Same range and comparable models
New arrivals
The latest machines added to the range
